Auto-idle (Miller Bluestar 2E) I have a Miller BlueStar 2E, not sure of the year model, but it's probably 15+ years old. Anyway, the machine runs and welds fine; however, it has developed a problem of not idling down after you stop welding. The only way to make it idle down is to flip the switch from 'On' to 'Off' and back to 'On' again.

A proposed class action alleges that certain Honda and Acura vehicles are equipped with a defective “idle stop” feature that causes the cars to suddenly become temporarily disabled. According to the 97-page lawsuit, 2016 to 2020 model year Honda Pilot, Honda Odyssey, Acura TLX and Acura MDX vehicles, i.e., the class vehicles, are equipped

As it turns out, the Idle Stop Solenoid (attached to the 2BBL Carb) is NOT part of the "Starting, Charging and Ignition System" - as the Test Light indicated. However, the I.S.S. IS present in my car's "Manual Heating/Air Conditioning System" - where it can ONLY be activated by "sliding" the console A/C Selector Switch to either the "Max

The following will happen: The yellow AUTO STOP (A) indicator on the instrument cluster will stay on after blinking for 5 seconds. The light on the ISG OFF button will illuminate. When the engine is in Idle Stop mode, it's possible to restart the engine without the driver taking any action.

^{The ISG system is to reduce the fuel consumption by automatically shutting down the engine, when the vehicle is at a standstill (i.e. red stop light, stop sign, and traffic jam). To stop the engine in idle stop mode. Decrease the vehicle speed to 0 km/h. Depress the brake pedal with the shift lever in D (Drive) or N (Neutral).} TKgwj.

41j9uebaxp.pages.dev/58

41j9uebaxp.pages.dev/587

41j9uebaxp.pages.dev/25

41j9uebaxp.pages.dev/500

41j9uebaxp.pages.dev/288

41j9uebaxp.pages.dev/214

41j9uebaxp.pages.dev/579

41j9uebaxp.pages.dev/71

idling stop not working